Is it possible to paint the interior of a car

Avoid putting a lot of paint down, as this can make the finish have less durability and even hurt the adhesion of the paint to the part. To protect the new paint, the parts should be clear coated. Double check the instructions on the can for the top coat window. It is good practice to lightly wipe the part down with a tack cloth using dabbing motions. As for applying clear, the same rules apply.

Keep the can inches away and sweep an even two or three coats. Make sure to get clear around the edges and underside. Once done, avoid the urge to put your shiny "new" parts back in. Painted parts need to cure. Leave the parts alone for a day or two, preferably in sunlight. After the cure period, carefully put the parts back in. If an edge gets chipped, spray a little bit of color into the can's cap and dab the paint into the chip with a paint brush. Do wear powderless latex or vinyl gloves when handling the parts.

Plastic parts absorb skin oils very easily and that will cause spots or fisheye. Do use the same brand and product line throughout the steps.

If using Dupli-Color for primer, use Dupli-Color for the color and clear. Don't get discouraged if it didn't turn out right. Nine times out of ten you can just sand everything off and try again. Do get creative by trying different colors or masking patterns. You are only limited by your imagination. The Process Step 1: Clean the area on and around the scratch with interior plastic cleaner. Step 2: Using a heat gun at around half power , gently apply heat to the plastic until it begins to soften.

Step 3: Apply a grain pad to the affected area, using very light pressure. Step 4: Let the area cool and harden. This vinyl coating provides excellent adhesion that will not rub off, crack or peel. It is suitable for use on car seats, car door panels, dashboards, floor mats and other interior surfaces. You can 't dye Alcantara, even though it's a synthetic material is still has the same properties as suede.

If you dye it, it will be stiff and look like crap. A color change can be made from any color to another, i. Auto seat covers are available in a variety of styles, textures and designs, and they can make the car seat feel more cozy and comfortable. Use a custom-fit seat cover. Add an ergonomic seat cushion.

Use a thermal seat cover. Add a neck pillow or bolster to the back of the car seat. Comfort: Technically, the seat itself doesn't change when you add leather to a vehicle. So, the comfort shouldn't change much. However, on some cars , the factory leather is lower grade than the leather you get from an aftermarket kit.

A complete interior restoration job usually involves completely vacuuming out the car , removing the floor panels and inner door panels, thoroughly cleaning the inside with a solvent or other cleansing solution, taking out the old seats and re-installing the new parts you've ordered piece by piece. Over time your cloth car seats may fade or discolor with use, or you might just outgrow the style and want to update the seat covering.

Also put down drop cloths, pieces of cardboard, or other protection against overspray. Apply thin primer coats with quick bursts of spraying. Follow the instructions on the can. Generally speaking, though, you'll shake the can for 1 minute; hold the can 6—8 inches 15—20 cm from the object; and spray in bursts over the surface of the object, keeping the can in motion as you spray.

Apply 1, 2, or more coats as directed. For multiple coats, wait the recommended time between applications usually minutes. Part 4. Choose the appropriate spray paint for your surface. Plastic parts should be sprayed with a paint labeled for use on plastic. Vinyl or fabric parts should likewise be sprayed with a vinyl or fabric paint, respectively. If possible, choose spray paints designed for use on automotive components. Vinyl and fabric spray paints are able to flex along with those materials.

A paint designed for plastic will crack and flake off of vinyl or fabric. Apply thin coats by using a quick, steady spraying motion. Spraying on the paint involves the same process as applying primer. Shake the can as directed usually for 1 minute , hold it 6—8 inches 15—20 cm from the object, and apply thin coats with bursts of spray while you move the can over the surface. It may take coats, or even more, to adequately cover some components.

Applying numerous thin coats produces far superior results to trying to spray on 1 or 2 thick coats. No matter how many coats of spray paint you apply to fabric, you may never achieve ideal results that cover every spot on the fabric.

This is especially true for suede fabric. Therefore, it's best to temper your expectations somewhat before painting interior fabric, or to let a pro do the job for you. Spray coats of clear coat on plastic or vinyl, if desired. Clear coat will add a little extra shine and protection to your paint job. Apply it in the same way as the paint, but take special care to apply thin, even coats over the surface of the object.

Otherwise, you may notice streaks or differences in the level of gloss on the finished product. Don't touch the components for 24 hours. No matter the material, and regardless of whether you applied clear coat or not, it's best to keep your hands off the paint job for at least a day. This will permit the paint to dry fully and remove any tackiness from the surface. If it does, and the fabric is on a seat, you'll have little choice but to either replace the seat or find a seat cover that will prevent stains on your clothing.

Unmask and reinstall the components. After 24 hours, peel off any painter's tape and plastic you used for masking purposes. Then, using your owner's manual as a guide, reinstall any removed components in the reverse order from how you took them out. For instance: Lift the seats into place, push in any plastic clips to reconnect any wiring, and reinstall the bolts there are usually 4 with a socket wrench. Reconnect the steering wheel's airbag and any components you removed very carefully according to your owner's manual, or have a professional do it.

Lift the door panels into place, connect the wiring by pushing the plastic clips in place, reinstall the mounting screws with a screwdriver, and pop in any plastic panels near the windows, handles, etc.

Step Gently roughen the surface of the plastic parts you want to paint. Use a scouring pad or grit sandpaper. The rougher surface will help the primer adhere. Step 2: Prepare the pieces you want to paint. Hang the accessories or pieces of the dashboard you want to paint from wire clothes hangers, or you can lay them on top of old newspaper. To do this, stand them in a shallow bucket of warm water that reaches the middle of the cans.

Warning : Do not overheat the cans and risk exploding them; simply take the chill out of the can. Apply the primer using a smooth motion, with overlapping strokes.

Let each coat dry for about five minutes before applying another coat. Spray three to four coats of primer. Apply the base coats in the same way you applied the primer coats.

Spray three to eight coats of base color. Let the paint dry for five minutes between coats. If you choose to use a lacquer, apply it the same way you applied the primer and base. You will most likely need about four to five coats of lacquer. Step 4: Leave the pieces to dry for at least three to four hours.

The parts need to dry completely before you polish them or try to refit the dashboard. It is just as important to prepare all necessary safety equipment and to work under safe conditions. If you cut any corners, you not only run the risk of doing a sub-par job or damaging the dashboard, but you might harm yourself in the process.

This article originally appeared on YourMechanic. Autoblog is partnering with YourMechanic to bring many of the repair and maintenance services you need right to you. Get service at your home or office 7 days a week with fair and transparent pricing.

We get it. Ads can be annoying.